It’s time to transform your garden

Ground preparation begins by excavating the area to the required depth and removing all vegetation, topsoil, and unsuitable material. A minimum 100mm layer of MOT Type 1 hardcore is then installed and mechanically compacted to create a solid and stable sub-base.

A full mortar bed is laid using a 5:1 sharp sand and cement mix to ensure complete support beneath each slab. Indian sandstone paving is carefully laid to the required levels and falls, allowing for effective drainage away from buildings.

Once the paving has cured, joints are filled with a suitable paving jointing compound or mortar, leaving a durable, attractive finish ready for use.

The area is excavated to the required depth, with all vegetation and unsuitable ground removed. A minimum 100mm layer of MOT Type 1 hardcore is installed and thoroughly compacted to provide a stable foundation.

A full mortar bed is prepared using a 5:1 sharp sand and cement mix. Due to the low porosity of porcelain paving, each slab is coated with a specialist porcelain primer slurry on the underside immediately before laying. This creates a strong bond between the slab and mortar bed, preventing movement and lifting.

The porcelain slabs are laid to precise levels and falls using suitable spacers to achieve consistent joints. Once cured, all joints are filled using a high-performance external porcelain grout, providing a durable, weather-resistant and low-maintenance finish.

The paving area is excavated to the required depth, with all vegetation and unsuitable material removed. A minimum 100mm layer of MOT Type 1 hardcore is installed and mechanically compacted to form a stable sub-base.

A full mortar bed is laid using a 5:1 sharp sand and cement mix. The riven paving slabs are carefully selected and laid tightly together with minimal spacing to create a traditional butted appearance with no visible joints. Particular attention is paid to slab selection and placement to achieve the best possible fit and finish.

The paving is laid to the correct levels and falls to ensure effective drainage while maintaining the natural appearance of the finished surface. This method creates a traditional, seamless patio finish while retaining the character of natural stone paving.

The area is excavated to the required depth, removing all vegetation, topsoil, and unsuitable material. A minimum 100mm layer of MOT Type 1 hardcore is installed and mechanically compacted in layers to create a strong and stable sub-base.

Suitable edge restraints are installed and secured in concrete to prevent movement of the paving. A screeded layer of sharp sand is then applied and levelled to provide a consistent laying course.

The block pavers are laid in the chosen pattern, ensuring accurate alignment and levels throughout. Once laid, kiln-dried sand is brushed into the joints and the surface is compacted using a vibrating plate compactor. Additional kiln-dried sand is then applied to fully fill the joints, creating a durable and long-lasting finished surface.

The area is excavated to the required depth, with all vegetation and unsuitable ground removed. A minimum 100mm layer of MOT Type 1 hardcore is installed and thoroughly compacted to provide a stable foundation.

Formwork is installed to the required dimensions and levels, ensuring suitable falls for drainage. Concrete is poured, levelled, and compacted before being finished to the client’s chosen specification, whether brushed, float-finished, or smooth trowelled.

The concrete is allowed to cure correctly to maximise strength and durability. Once complete, the finished surface provides a hard-wearing, low-maintenance area suitable for patios, pathways, driveways, and other external applications.

The area is excavated to the required depth and all unsuitable material removed. A minimum 100mm layer of MOT Type 1 hardcore is installed and mechanically compacted to create a stable sub-base.

A full mortar bed is prepared using a 5:1 sharp sand and cement mix. Granite setts are individually laid by hand to the required pattern, levels, and falls, ensuring a strong and durable surface capable of withstanding heavy use.

Once the laying bed has cured, joints are filled with a suitable external jointing mortar or resin-based grout to provide a secure and weather-resistant finish. The completed surface offers a premium appearance with exceptional durability, making it ideal for driveways, pathways, edging, and decorative paving features.